UL/TX
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects 1 Releases Wiki Activity
Files
master
TX/board/pin_mux.c

955 lines
53 KiB
C
Raw Permalink Normal View History

initial check in based on SVN revision 575
2025-05-14 12:57:39 -05:00
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v13.1
processor: LPC54114J256
package_id: LPC54114J256BD64
mcu_data: ksdk2_0
processor_version: 13.0.1
board: LPCXpresso54114
pin_labels:
- {pin_num: '3', pin_signal: PIO0_25/FC4_RTS_SCL_SSEL1/FC6_CTS_SDA_SSEL0/CTIMER0_CAP2/CTIMER1_CAP1, label: 'J1[1]/JS4[1]/U10[7]/P0_25-FC4_SCLX', identifier: SFTKY4}
- {pin_num: '2', pin_signal: PIO0_24/FC1_CTS_SDA_SSEL0/CTIMER0_CAP1/CTIMER0_MAT0, label: 'J4[10]/JS2[1]/JS5[3]/U10[5]/U12[E6]/SW1/BRIDGE_SDA-WAKEUP', identifier: SFTKY3}
- {pin_num: '1', pin_signal: PIO0_23/FC1_RTS_SCL_SSEL1/CTIMER0_CAP0/UTICK_CAP1, label: 'J4[9]/JS3[1]/JS4[3]/U10[7]/U12[D6]/BRIDGE_SCL', identifier: RST_RF}
- {pin_num: '4', pin_signal: PIO0_26/FC4_CTS_SDA_SSEL0/CTIMER0_CAP3, label: 'J1[3]/JS5[1]/U10[5]/P0_26-FC4_SDAX', identifier: RF_BUSY}
- {pin_num: '7', pin_signal: PIO1_16/PDM0_DATA/CTIMER0_MAT0/CTIMER0_CAP0/FC7_RTS_SCL_SSEL1, label: 'J1[19]/P1_16-CT32B0_MAT0-GYRO_INT1', identifier: CTL_PSU}
- {pin_num: '10', pin_signal: PIO1_17/MCLK/UTICK_CAP3, label: 'J9[9]/P1_17-IR_LEARN_EN', identifier: E_STOP}
- {pin_num: '11', pin_signal: PIO0_29/FC1_RXD_SDA_MOSI/SCT0_OUT2/CTIMER0_MAT3/CTIMER0_CAP1/CTIMER0_MAT1/ADC0_0, label: 'J2[5]/D2[1]/P0_29-CT32B0_MAT3-RED', identifier: I_OUT1}
- {pin_num: '12', pin_signal: PIO0_30/FC1_TXD_SCL_MISO/SCT0_OUT3/CTIMER0_MAT2/CTIMER0_CAP2/ADC0_1, label: 'J9[2]/P0_30-ADC1', identifier: V_OUT1}
- {pin_num: '14', pin_signal: PIO1_0/PDM0_DATA/FC2_RTS_SCL_SSEL1/CTIMER3_MAT1/CTIMER0_CAP0/ADC0_3, label: 'J2[3]/P1_0-PDM0_DATA-CT32B3_MAT1', identifier: PSU_MON}
- {pin_num: '15', pin_signal: PIO1_1/SWO/SCT0_OUT4/FC5_SSEL2/FC4_TXD_SCL_MISO/ADC0_4, label: 'J1[15]/P1_1-FC5_SSEL2', identifier: VBAT_MON}
- {pin_num: '16', pin_signal: PIO1_2/MCLK/FC7_SSEL3/SCT0_OUT5/FC5_SSEL3/FC4_RXD_SDA_MOSI/ADC0_5, label: 'J9[7]/JS8[1]/U5[1]/P1_2-FC5_SSEL3', identifier: ID1}
- {pin_num: '17', pin_signal: PIO1_3/FC7_SSEL2/SCT0_OUT6/FC3_SCK/CTIMER0_CAP1/USB0_UP_LED/ADC0_6, label: 'J2[20]/P1_3-FC7_SSEL2-CT32B0_CAP1', identifier: ID2}
- {pin_num: '18', pin_signal: PIO1_4/PDM1_CLK/FC7_RTS_SCL_SSEL1/SCT0_OUT7/FC3_TXD_SCL_MISO/CTIMER0_MAT1/ADC0_7, label: 'J2[18]/J9[10]/P1_4-ADC7-PDM1_CLK-FC7_RTS-FC3_TXD',
identifier: V_CHK}
- {pin_num: '19', pin_signal: PIO1_5/PDM1_DATA/FC7_CTS_SDA_SSEL0/CTIMER1_CAP0/CTIMER1_MAT3/USB0_FRAME/ADC0_8, label: 'J2[16]/J9[12]/P1_5-ADC8-PDM1_DAT-FC7_CTS', identifier: TEMP}
- {pin_num: '27', pin_signal: PIO1_7/FC7_RXD_SDA_MOSI_DATA/CTIMER1_MAT2/CTIMER1_CAP2/ADC0_10, label: 'J1[10]/P1_7-FC7_RXD_SDA_MOSI_DATA', identifier: BAT_ID}
- {pin_num: '28', pin_signal: PIO1_8/FC7_TXD_SCL_MISO_WS/CTIMER1_MAT3/CTIMER1_CAP3/ADC0_11, label: 'J1[12]/J9[6]/P1_8-ADC11-FC7_TXD_SCL_MISO_FRAME', identifier: LCD_CD}
- {pin_num: '29', pin_signal: PIO1_9/FC3_RXD_SDA_MOSI/CTIMER0_CAP2/USB0_UP_LED, label: 'J9[5]/D2[3]/P1_9-BLUE_LED', identifier: SIG_EN}
- {pin_num: '30', pin_signal: PIO1_10/FC6_TXD_SCL_MISO_WS/SCT0_OUT4/FC1_SCK/USB0_FRAME, label: 'J9[8]/D2[4]/P1_10-SCT4-LED_GREEN', identifier: SD_EN}
- {pin_num: '31', pin_signal: PIO0_0/FC0_RXD_SDA_MOSI/FC3_CTS_SDA_SSEL0/CTIMER0_CAP0/SCT0_OUT3, label: 'U18[4]/TO_MUX_P0_0-ISP_RX', identifier: FC0_MOSI}
- {pin_num: '32', pin_signal: PIO0_1/FC0_TXD_SCL_MISO/FC3_RTS_SCL_SSEL1/CTIMER0_CAP1/SCT0_OUT1, label: 'U6[4]/U22[3]/P0_1-ISP_TX', identifier: FC0_MISO}
- {pin_num: '36', pin_signal: PIO0_2/FC0_CTS_SDA_SSEL0/FC2_SSEL3/CTIMER2_CAP1, label: 'J9[1]/P0_2-GPIO_SPI_CS', identifier: SFTKY1}
- {pin_num: '37', pin_signal: PIO0_3/FC0_RTS_SCL_SSEL1/FC2_SSEL2/CTIMER1_MAT3, label: 'J9[3]/P0_3-GPIO_SPI_CS', identifier: SFTKY2}
- {pin_num: '39', pin_signal: PIO0_5/FC6_RXD_SDA_MOSI_DATA/SCT0_OUT6/CTIMER0_MAT0, label: 'J1[20]/P0_5-FC6_RXD_SDA_MOSI_DATA', identifier: RXD}
- {pin_num: '40', pin_signal: PIO0_6/FC6_TXD_SCL_MISO_WS/CTIMER0_MAT1/UTICK_CAP0, label: 'J1[18]/P0_6-FC6_TXD_SCL_MISO_FRAME', identifier: TXD}
- {pin_num: '41', pin_signal: PIO0_7/FC6_SCK/SCT0_OUT0/CTIMER0_MAT2/CTIMER0_CAP2, label: 'J1[16]/P0_7-FC6_SCK', identifier: POT_CS}
- {pin_num: '42', pin_signal: PIO1_11/FC6_RTS_SCL_SSEL1/CTIMER1_CAP0/FC4_SCK/USB0_VBUS, label: 'J2[19]/P1_11-FC6_RTS_SSEL1-MAG_DRDY', identifier: RAMP_EN}
- {pin_num: '43', pin_signal: PIO0_8/FC2_RXD_SDA_MOSI/SCT0_OUT1/CTIMER0_MAT3, label: 'J2[15]/P0_8-FC2_RXD_SDA_MOSI', identifier: PWM_BAR}
- {pin_num: '44', pin_signal: PIO0_9/FC2_TXD_SCL_MISO/SCT0_OUT2/CTIMER3_CAP0/FC3_CTS_SDA_SSEL0, label: 'J2[13]/P0_9-FC2_TXD_SCL_MISO', identifier: PWM_CPU}
- {pin_num: '45', pin_signal: PIO0_10/FC2_SCK/SCT0_OUT3/CTIMER3_MAT0, label: 'J2[11]/P0_10-FC2_SCK-CT32B3_MAT0', identifier: CS_EEP}
- {pin_num: '46', pin_signal: PIO0_11/FC3_SCK/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT1, label: 'J4[4]/U9[13]/BRIDGE_T_SCK', identifier: SCLK}
- {pin_num: '47', pin_signal: PIO0_12/FC3_RXD_SDA_MOSI/FC6_TXD_SCL_MISO_WS/CTIMER2_MAT3, label: 'J4[2]/U9[11]/BRIDGE_T_MOSI', identifier: SDATA}
- {pin_num: '48', pin_signal: PIO0_13/FC3_TXD_SCL_MISO/SCT0_OUT4/CTIMER2_MAT0, label: 'J4[3]/U15[4]/BRIDGE_T_MISO', identifier: SDIN}
- {pin_num: '49', pin_signal: PIO0_14/FC3_CTS_SDA_SSEL0/SCT0_OUT5/CTIMER2_MAT1/FC1_SCK, label: 'J2[12]/J4[1]/U9[14]/BRIDGE_T_SSEL-SPIFI_IO3', identifier: SFTKY0}
- {pin_num: '50', pin_signal: PIO0_15/FC3_RTS_SCL_SSEL1/SWO/CTIMER2_MAT2/FC4_SCK, label: 'J2[10]/JS30/U4[12]/TDO-SWO_TRGT-SPIFI_IO2', identifier: LCD_CS}
- {pin_num: '51', pin_signal: PIO1_12/FC5_RXD_SDA_MOSI/CTIMER1_MAT0/FC7_SCK/UTICK_CAP2, label: 'J2[9]/P1_12-CT32B1_MAT0-ACCl_INT1', identifier: SIG_RST}
- {pin_num: '54', pin_signal: PIO1_13/FC5_TXD_SCL_MISO/CTIMER1_MAT1/FC7_RXD_SDA_MOSI_DATA, label: 'J2[7]/P1_13-CT32B1_MAT1', identifier: SD_RST}
- {pin_num: '57', pin_signal: PIO1_14/FC2_RXD_SDA_MOSI/SCT0_OUT7/FC7_TXD_SCL_MISO_WS, label: 'J2[1]/P1_14-SCTO7', identifier: RAMP_RST}
- {pin_num: '58', pin_signal: PIO0_18/FC5_TXD_SCL_MISO/SCT0_OUT0/CTIMER0_MAT0, label: 'J1[11]/U5[2]/P0_18-FC5_TXD_SCL_MISO', identifier: WRITE}
- {pin_num: '59', pin_signal: PIO0_19/FC5_SCK/SCT0_OUT1/CTIMER0_MAT1, label: 'J1[9]/J2[8]/U5[6]/P0_19-FC5_SCK-SPIFI_CSn', identifier: PORT_LE}
- {pin_num: '60', pin_signal: PIO0_20/FC5_RXD_SDA_MOSI/FC0_SCK/CTIMER3_CAP0, label: 'J1[13]/U5[5]/P0_20-FC5_RXD_SDA_MOSI', identifier: FC0_SCK}
- {pin_num: '61', pin_signal: PIO0_21/CLKOUT/FC0_TXD_SCL_MISO/CTIMER3_MAT0, label: 'J2[2]/P0_21-CLKOUT-SPIFI_CLK', identifier: POT_CS2}
- {pin_num: '62', pin_signal: PIO1_15/PDM0_CLK/SCT0_OUT5/CTIMER1_CAP3/FC7_CTS_SDA_SSEL0, label: 'J1[17]/P1_15-SCTO5-FC7_CTS', identifier: ON_POLL}
- {pin_num: '63', pin_signal: PIO0_22/CLKIN/FC0_RXD_SDA_MOSI/CTIMER3_MAT3, label: 'J4[8]/P0_22-BRIDGE_GPIO', identifier: SYS_CLK}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
#include "fsl_common.h"
#include "fsl_gpio.h"
#include "fsl_iocon.h"
#include "pin_mux.h"
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitBootPins
* Description : Calls initialization functions.
*
* END ****************************************************************************************************************/
void BOARD_InitBootPins(void)
{
BOARD_InitPins();
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', coreID: cm4, enableClock: 'true'}
- pin_list:
- {pin_num: '31', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI, pin_signal: PIO0_0/FC0_RXD_SDA_MOSI/FC3_CTS_SDA_SSEL0/CTIMER0_CAP0/SCT0_OUT3, mode: inactive, invert: disabled,
glitch_filter: disabled, slew_rate: standard, open_drain: disabled}
- {pin_num: '32', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO, pin_signal: PIO0_1/FC0_TXD_SCL_MISO/FC3_RTS_SCL_SSEL1/CTIMER0_CAP1/SCT0_OUT1, mode: inactive, invert: disabled,
glitch_filter: disabled, slew_rate: standard, open_drain: disabled}
- {pin_num: '46', peripheral: FLEXCOMM3, signal: SCK, pin_signal: PIO0_11/FC3_SCK/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT1, mode: pullUp, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: '47', peripheral: FLEXCOMM3, signal: RXD_SDA_MOSI, pin_signal: PIO0_12/FC3_RXD_SDA_MOSI/FC6_TXD_SCL_MISO_WS/CTIMER2_MAT3, mode: pullUp, invert: disabled,
glitch_filter: disabled, slew_rate: standard, open_drain: disabled}
- {pin_num: '48', peripheral: FLEXCOMM3, signal: TXD_SCL_MISO, pin_signal: PIO0_13/FC3_TXD_SCL_MISO/SCT0_OUT4/CTIMER2_MAT0, mode: pullUp, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: '11', peripheral: ADC0, signal: 'CH, 0', pin_signal: PIO0_29/FC1_RXD_SDA_MOSI/SCT0_OUT2/CTIMER0_MAT3/CTIMER0_CAP1/CTIMER0_MAT1/ADC0_0}
- {pin_num: '12', peripheral: ADC0, signal: 'CH, 1', pin_signal: PIO0_30/FC1_TXD_SCL_MISO/SCT0_OUT3/CTIMER0_MAT2/CTIMER0_CAP2/ADC0_1}
- {pin_num: '18', peripheral: ADC0, signal: 'CH, 7', pin_signal: PIO1_4/PDM1_CLK/FC7_RTS_SCL_SSEL1/SCT0_OUT7/FC3_TXD_SCL_MISO/CTIMER0_MAT1/ADC0_7}
- {pin_num: '17', peripheral: ADC0, signal: 'CH, 6', pin_signal: PIO1_3/FC7_SSEL2/SCT0_OUT6/FC3_SCK/CTIMER0_CAP1/USB0_UP_LED/ADC0_6}
- {pin_num: '16', peripheral: ADC0, signal: 'CH, 5', pin_signal: PIO1_2/MCLK/FC7_SSEL3/SCT0_OUT5/FC5_SSEL3/FC4_RXD_SDA_MOSI/ADC0_5}
- {pin_num: '15', peripheral: ADC0, signal: 'CH, 4', pin_signal: PIO1_1/SWO/SCT0_OUT4/FC5_SSEL2/FC4_TXD_SCL_MISO/ADC0_4}
- {pin_num: '14', peripheral: ADC0, signal: 'CH, 3', pin_signal: PIO1_0/PDM0_DATA/FC2_RTS_SCL_SSEL1/CTIMER3_MAT1/CTIMER0_CAP0/ADC0_3}
- {pin_num: '51', peripheral: GPIO, signal: 'PIO1, 12', pin_signal: PIO1_12/FC5_RXD_SDA_MOSI/CTIMER1_MAT0/FC7_SCK/UTICK_CAP2, direction: OUTPUT}
- {pin_num: '54', peripheral: GPIO, signal: 'PIO1, 13', pin_signal: PIO1_13/FC5_TXD_SCL_MISO/CTIMER1_MAT1/FC7_RXD_SDA_MOSI_DATA, direction: OUTPUT}
- {pin_num: '57', peripheral: GPIO, signal: 'PIO1, 14', pin_signal: PIO1_14/FC2_RXD_SDA_MOSI/SCT0_OUT7/FC7_TXD_SCL_MISO_WS, direction: OUTPUT}
- {pin_num: '62', peripheral: GPIO, signal: 'PIO1, 15', pin_signal: PIO1_15/PDM0_CLK/SCT0_OUT5/CTIMER1_CAP3/FC7_CTS_SDA_SSEL0, direction: INPUT}
- {pin_num: '7', peripheral: GPIO, signal: 'PIO1, 16', pin_signal: PIO1_16/PDM0_DATA/CTIMER0_MAT0/CTIMER0_CAP0/FC7_RTS_SCL_SSEL1, direction: OUTPUT, mode: pullDown}
- {pin_num: '60', peripheral: FLEXCOMM0, signal: SCK, pin_signal: PIO0_20/FC5_RXD_SDA_MOSI/FC0_SCK/CTIMER3_CAP0}
- {pin_num: '36', peripheral: GPIO, signal: 'PIO0, 2', pin_signal: PIO0_2/FC0_CTS_SDA_SSEL0/FC2_SSEL3/CTIMER2_CAP1, direction: INPUT}
- {pin_num: '37', peripheral: GPIO, signal: 'PIO0, 3', pin_signal: PIO0_3/FC0_RTS_SCL_SSEL1/FC2_SSEL2/CTIMER1_MAT3, direction: INPUT}
- {pin_num: '41', peripheral: GPIO, signal: 'PIO0, 7', pin_signal: PIO0_7/FC6_SCK/SCT0_OUT0/CTIMER0_MAT2/CTIMER0_CAP2, direction: OUTPUT, gpio_init_state: 'true'}
- {pin_num: '61', peripheral: GPIO, signal: 'PIO0, 21', pin_signal: PIO0_21/CLKOUT/FC0_TXD_SCL_MISO/CTIMER3_MAT0, direction: OUTPUT, gpio_init_state: 'true'}
- {pin_num: '52', peripheral: SWD, signal: SWCLK, pin_signal: PIO0_16/FC3_SSEL2/FC6_CTS_SDA_SSEL0/CTIMER3_MAT1/SWCLK}
- {pin_num: '53', peripheral: SWD, signal: SWDIO, pin_signal: PIO0_17/FC3_SSEL3/FC6_RTS_SCL_SSEL1/CTIMER3_MAT2/SWDIO}
- {pin_num: '28', peripheral: GPIO, signal: 'PIO1, 8', pin_signal: PIO1_8/FC7_TXD_SCL_MISO_WS/CTIMER1_MAT3/CTIMER1_CAP3/ADC0_11, direction: OUTPUT}
- {pin_num: '59', peripheral: GPIO, signal: 'PIO0, 19', pin_signal: PIO0_19/FC5_SCK/SCT0_OUT1/CTIMER0_MAT1, direction: OUTPUT}
- {pin_num: '2', peripheral: GPIO, signal: 'PIO0, 24', pin_signal: PIO0_24/FC1_CTS_SDA_SSEL0/CTIMER0_CAP1/CTIMER0_MAT0, direction: INPUT}
- {pin_num: '3', peripheral: GPIO, signal: 'PIO0, 25', pin_signal: PIO0_25/FC4_RTS_SCL_SSEL1/FC6_CTS_SDA_SSEL0/CTIMER0_CAP2/CTIMER1_CAP1, direction: INPUT}
- {pin_num: '49', peripheral: GPIO, signal: 'PIO0, 14', pin_signal: PIO0_14/FC3_CTS_SDA_SSEL0/SCT0_OUT5/CTIMER2_MAT1/FC1_SCK, direction: INPUT, mode: inactive}
- {pin_num: '19', peripheral: ADC0, signal: 'CH, 8', pin_signal: PIO1_5/PDM1_DATA/FC7_CTS_SDA_SSEL0/CTIMER1_CAP0/CTIMER1_MAT3/USB0_FRAME/ADC0_8}
- {pin_num: '4', peripheral: GPIO, signal: 'PIO0, 26', pin_signal: PIO0_26/FC4_CTS_SDA_SSEL0/CTIMER0_CAP3, direction: OUTPUT, i2c_filter: disabled}
- {pin_num: '10', peripheral: GPIO, signal: 'PIO1, 17', pin_signal: PIO1_17/MCLK/UTICK_CAP3, direction: OUTPUT}
- {pin_num: '27', peripheral: ADC0, signal: 'CH, 10', pin_signal: PIO1_7/FC7_RXD_SDA_MOSI_DATA/CTIMER1_MAT2/CTIMER1_CAP2/ADC0_10}
- {pin_num: '29', peripheral: GPIO, signal: 'PIO1, 9', pin_signal: PIO1_9/FC3_RXD_SDA_MOSI/CTIMER0_CAP2/USB0_UP_LED, direction: OUTPUT}
- {pin_num: '30', peripheral: GPIO, signal: 'PIO1, 10', pin_signal: PIO1_10/FC6_TXD_SCL_MISO_WS/SCT0_OUT4/FC1_SCK/USB0_FRAME, direction: OUTPUT}
- {pin_num: '39', peripheral: FLEXCOMM6, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_5/FC6_RXD_SDA_MOSI_DATA/SCT0_OUT6/CTIMER0_MAT0}
- {pin_num: '40', peripheral: FLEXCOMM6, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_6/FC6_TXD_SCL_MISO_WS/CTIMER0_MAT1/UTICK_CAP0, identifier: ''}
- {pin_num: '42', peripheral: GPIO, signal: 'PIO1, 11', pin_signal: PIO1_11/FC6_RTS_SCL_SSEL1/CTIMER1_CAP0/FC4_SCK/USB0_VBUS, direction: OUTPUT}
- {pin_num: '45', peripheral: GPIO, signal: 'PIO0, 10', pin_signal: PIO0_10/FC2_SCK/SCT0_OUT3/CTIMER3_MAT0, direction: OUTPUT}
- {pin_num: '58', peripheral: GPIO, signal: 'PIO0, 18', pin_signal: PIO0_18/FC5_TXD_SCL_MISO/SCT0_OUT0/CTIMER0_MAT0, direction: OUTPUT}
- {pin_num: '63', peripheral: SYSCON, signal: CLKIN, pin_signal: PIO0_22/CLKIN/FC0_RXD_SDA_MOSI/CTIMER3_MAT3}
- {pin_num: '50', peripheral: FLEXCOMM3, signal: RTS_SCL_SSEL1, pin_signal: PIO0_15/FC3_RTS_SCL_SSEL1/SWO/CTIMER2_MAT2/FC4_SCK, identifier: ''}
- {pin_num: '43', peripheral: SCT0, signal: 'OUT, 1', pin_signal: PIO0_8/FC2_RXD_SDA_MOSI/SCT0_OUT1/CTIMER0_MAT3}
- {pin_num: '44', peripheral: SCT0, signal: 'OUT, 2', pin_signal: PIO0_9/FC2_TXD_SCL_MISO/SCT0_OUT2/CTIMER3_CAP0/FC3_CTS_SDA_SSEL0}
- {pin_num: '1', peripheral: SCT0, signal: 'IN, 0', pin_signal: PIO0_23/FC1_RTS_SCL_SSEL1/CTIMER0_CAP0/UTICK_CAP1, identifier: ''}
- {pin_num: '5', peripheral: USB0, signal: USB_DP, pin_signal: USB0_DP}
- {pin_num: '6', peripheral: USB0, signal: USB_DM, pin_signal: USB0_DM}
- {pin_num: '26', peripheral: USB0, signal: USB_VBUS, pin_signal: PIO1_6/FC7_SCK/CTIMER1_CAP2/CTIMER1_MAT2/USB0_VBUS/ADC0_9, identifier: ''}
- {pin_num: '38', peripheral: GPIO, signal: 'PIO0, 4', pin_signal: PIO0_4/FC0_SCK/FC3_SSEL2/CTIMER0_CAP2, direction: OUTPUT}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
/* Function assigned for the Cortex-M4F */
void BOARD_InitPins(void)
{
/* Enables the clock for the IOCON block. 0 = Disable; 1 = Enable.: 0x01u */
CLOCK_EnableClock(kCLOCK_Iocon);
/* Enables the clock for the GPIO0 module */
CLOCK_EnableClock(kCLOCK_Gpio0);
/* Enables the clock for the GPIO1 module */
CLOCK_EnableClock(kCLOCK_Gpio1);
gpio_pin_config_t SFTKY1_config = {
.pinDirection = kGPIO_DigitalInput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_2 (pin 36) */
GPIO_PinInit(BOARD_INITPINS_SFTKY1_GPIO, BOARD_INITPINS_SFTKY1_PORT, BOARD_INITPINS_SFTKY1_PIN, &SFTKY1_config);
gpio_pin_config_t SFTKY2_config = {
.pinDirection = kGPIO_DigitalInput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_3 (pin 37) */
GPIO_PinInit(BOARD_INITPINS_SFTKY2_GPIO, BOARD_INITPINS_SFTKY2_PORT, BOARD_INITPINS_SFTKY2_PIN, &SFTKY2_config);
gpio_pin_config_t gpio0_pin38_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_4 (pin 38) */
GPIO_PinInit(GPIO, 0U, 4U, &gpio0_pin38_config);
gpio_pin_config_t POT_CS_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 1U
};
/* Initialize GPIO functionality on pin PIO0_7 (pin 41) */
GPIO_PinInit(BOARD_INITPINS_POT_CS_GPIO, BOARD_INITPINS_POT_CS_PORT, BOARD_INITPINS_POT_CS_PIN, &POT_CS_config);
gpio_pin_config_t CS_EEP_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_10 (pin 45) */
GPIO_PinInit(BOARD_INITPINS_CS_EEP_GPIO, BOARD_INITPINS_CS_EEP_PORT, BOARD_INITPINS_CS_EEP_PIN, &CS_EEP_config);
gpio_pin_config_t SFTKY0_config = {
.pinDirection = kGPIO_DigitalInput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_14 (pin 49) */
GPIO_PinInit(BOARD_INITPINS_SFTKY0_GPIO, BOARD_INITPINS_SFTKY0_PORT, BOARD_INITPINS_SFTKY0_PIN, &SFTKY0_config);
gpio_pin_config_t WRITE_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_18 (pin 58) */
GPIO_PinInit(BOARD_INITPINS_WRITE_GPIO, BOARD_INITPINS_WRITE_PORT, BOARD_INITPINS_WRITE_PIN, &WRITE_config);
gpio_pin_config_t PORT_LE_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_19 (pin 59) */
GPIO_PinInit(BOARD_INITPINS_PORT_LE_GPIO, BOARD_INITPINS_PORT_LE_PORT, BOARD_INITPINS_PORT_LE_PIN, &PORT_LE_config);
gpio_pin_config_t POT_CS2_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 1U
};
/* Initialize GPIO functionality on pin PIO0_21 (pin 61) */
GPIO_PinInit(BOARD_INITPINS_POT_CS2_GPIO, BOARD_INITPINS_POT_CS2_PORT, BOARD_INITPINS_POT_CS2_PIN, &POT_CS2_config);
gpio_pin_config_t SFTKY3_config = {
.pinDirection = kGPIO_DigitalInput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_24 (pin 2) */
GPIO_PinInit(BOARD_INITPINS_SFTKY3_GPIO, BOARD_INITPINS_SFTKY3_PORT, BOARD_INITPINS_SFTKY3_PIN, &SFTKY3_config);
gpio_pin_config_t SFTKY4_config = {
.pinDirection = kGPIO_DigitalInput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_25 (pin 3) */
GPIO_PinInit(BOARD_INITPINS_SFTKY4_GPIO, BOARD_INITPINS_SFTKY4_PORT, BOARD_INITPINS_SFTKY4_PIN, &SFTKY4_config);
gpio_pin_config_t RF_BUSY_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_26 (pin 4) */
GPIO_PinInit(BOARD_INITPINS_RF_BUSY_GPIO, BOARD_INITPINS_RF_BUSY_PORT, BOARD_INITPINS_RF_BUSY_PIN, &RF_BUSY_config);
gpio_pin_config_t LCD_CD_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO1_8 (pin 28) */
GPIO_PinInit(BOARD_INITPINS_LCD_CD_GPIO, BOARD_INITPINS_LCD_CD_PORT, BOARD_INITPINS_LCD_CD_PIN, &LCD_CD_config);
gpio_pin_config_t SIG_EN_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO1_9 (pin 29) */
GPIO_PinInit(BOARD_INITPINS_SIG_EN_GPIO, BOARD_INITPINS_SIG_EN_PORT, BOARD_INITPINS_SIG_EN_PIN, &SIG_EN_config);
gpio_pin_config_t SD_EN_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO1_10 (pin 30) */
GPIO_PinInit(BOARD_INITPINS_SD_EN_GPIO, BOARD_INITPINS_SD_EN_PORT, BOARD_INITPINS_SD_EN_PIN, &SD_EN_config);
gpio_pin_config_t RAMP_EN_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO1_11 (pin 42) */
GPIO_PinInit(BOARD_INITPINS_RAMP_EN_GPIO, BOARD_INITPINS_RAMP_EN_PORT, BOARD_INITPINS_RAMP_EN_PIN, &RAMP_EN_config);
gpio_pin_config_t SIG_RST_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO1_12 (pin 51) */
GPIO_PinInit(BOARD_INITPINS_SIG_RST_GPIO, BOARD_INITPINS_SIG_RST_PORT, BOARD_INITPINS_SIG_RST_PIN, &SIG_RST_config);
gpio_pin_config_t SD_RST_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO1_13 (pin 54) */
GPIO_PinInit(BOARD_INITPINS_SD_RST_GPIO, BOARD_INITPINS_SD_RST_PORT, BOARD_INITPINS_SD_RST_PIN, &SD_RST_config);
gpio_pin_config_t RAMP_RST_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO1_14 (pin 57) */
GPIO_PinInit(BOARD_INITPINS_RAMP_RST_GPIO, BOARD_INITPINS_RAMP_RST_PORT, BOARD_INITPINS_RAMP_RST_PIN, &RAMP_RST_config);
gpio_pin_config_t ON_POLL_config = {
.pinDirection = kGPIO_DigitalInput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO1_15 (pin 62) */
GPIO_PinInit(BOARD_INITPINS_ON_POLL_GPIO, BOARD_INITPINS_ON_POLL_PORT, BOARD_INITPINS_ON_POLL_PIN, &ON_POLL_config);
gpio_pin_config_t CTL_PSU_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO1_16 (pin 7) */
GPIO_PinInit(BOARD_INITPINS_CTL_PSU_GPIO, BOARD_INITPINS_CTL_PSU_PORT, BOARD_INITPINS_CTL_PSU_PIN, &CTL_PSU_config);
gpio_pin_config_t E_STOP_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO1_17 (pin 10) */
GPIO_PinInit(BOARD_INITPINS_E_STOP_GPIO, BOARD_INITPINS_E_STOP_PORT, BOARD_INITPINS_E_STOP_PIN, &E_STOP_config);
const uint32_t FC0_MOSI = (/* Pin is configured as FC0_RXD_SDA_MOSI */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT0 PIN0 (coords: 31) is configured as FC0_RXD_SDA_MOSI */
IOCON_PinMuxSet(IOCON, BOARD_INITPINS_FC0_MOSI_PORT, BOARD_INITPINS_FC0_MOSI_PIN, FC0_MOSI);
const uint32_t FC0_MISO = (/* Pin is configured as FC0_TXD_SCL_MISO */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT0 PIN1 (coords: 32) is configured as FC0_TXD_SCL_MISO */
IOCON_PinMuxSet(IOCON, BOARD_INITPINS_FC0_MISO_PORT, BOARD_INITPINS_FC0_MISO_PIN, FC0_MISO);
IOCON->PIO[0][10] = ((IOCON->PIO[0][10] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT010 (pin 45) is configured as PIO0_10. */
| IOCON_PIO_FUNC(PIO010_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO010_DIGIMODE_DIGITAL));
const uint32_t SCLK = (/* Pin is configured as FC3_SCK */
IOCON_PIO_FUNC1 |
/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT0 PIN11 (coords: 46) is configured as FC3_SCK */
IOCON_PinMuxSet(IOCON, BOARD_INITPINS_SCLK_PORT, BOARD_INITPINS_SCLK_PIN, SCLK);
const uint32_t SDATA = (/* Pin is configured as FC3_RXD_SDA_MOSI */
IOCON_PIO_FUNC1 |
/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT0 PIN12 (coords: 47) is configured as FC3_RXD_SDA_MOSI */
IOCON_PinMuxSet(IOCON, BOARD_INITPINS_SDATA_PORT, BOARD_INITPINS_SDATA_PIN, SDATA);
const uint32_t SDIN = (/* Pin is configured as FC3_TXD_SCL_MISO */
IOCON_PIO_FUNC1 |
/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT0 PIN13 (coords: 48) is configured as FC3_TXD_SCL_MISO */
IOCON_PinMuxSet(IOCON, BOARD_INITPINS_SDIN_PORT, BOARD_INITPINS_SDIN_PIN, SDIN);
IOCON->PIO[0][14] = ((IOCON->PIO[0][14] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT014 (pin 49) is configured as PIO0_14. */
| IOCON_PIO_FUNC(PIO014_FUNC_ALT0)
/* Selects function mode (on-chip pull-up/pull-down resistor control).
* : Inactive.
* Inactive (no pull-down/pull-up resistor enabled). */
| IOCON_PIO_MODE(PIO014_MODE_INACTIVE)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO014_DIGIMODE_DIGITAL));
IOCON->PIO[0][15] = ((IOCON->PIO[0][15] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT015 (pin 50) is configured as FC3_RTS_SCL_SSEL1. */
| IOCON_PIO_FUNC(PIO015_FUNC_ALT1)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO015_DIGIMODE_DIGITAL));
IOCON->PIO[0][16] = ((IOCON->PIO[0][16] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT016 (pin 52) is configured as SWCLK. */
| IOCON_PIO_FUNC(PIO016_FUNC_ALT5)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO016_DIGIMODE_DIGITAL));
IOCON->PIO[0][17] = ((IOCON->PIO[0][17] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT017 (pin 53) is configured as SWDIO. */
| IOCON_PIO_FUNC(PIO017_FUNC_ALT5)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO017_DIGIMODE_DIGITAL));
IOCON->PIO[0][18] = ((IOCON->PIO[0][18] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT018 (pin 58) is configured as PIO0_18. */
| IOCON_PIO_FUNC(PIO018_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO018_DIGIMODE_DIGITAL));
IOCON->PIO[0][19] = ((IOCON->PIO[0][19] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT019 (pin 59) is configured as PIO0_19. */
| IOCON_PIO_FUNC(PIO019_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO019_DIGIMODE_DIGITAL));
IOCON->PIO[0][2] = ((IOCON->PIO[0][2] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT02 (pin 36) is configured as PIO0_2. */
| IOCON_PIO_FUNC(PIO02_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO02_DIGIMODE_DIGITAL));
IOCON->PIO[0][20] = ((IOCON->PIO[0][20] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT020 (pin 60) is configured as FC0_SCK. */
| IOCON_PIO_FUNC(PIO020_FUNC_ALT2)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO020_DIGIMODE_DIGITAL));
IOCON->PIO[0][21] = ((IOCON->PIO[0][21] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT021 (pin 61) is configured as PIO0_21. */
| IOCON_PIO_FUNC(PIO021_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO021_DIGIMODE_DIGITAL));
IOCON->PIO[0][22] = ((IOCON->PIO[0][22] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT022 (pin 63) is configured as CLKIN. */
| IOCON_PIO_FUNC(PIO022_FUNC_ALT1)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO022_DIGIMODE_DIGITAL));
IOCON->PIO[0][24] = ((IOCON->PIO[0][24] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT024 (pin 2) is configured as PIO0_24. */
| IOCON_PIO_FUNC(PIO024_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO024_DIGIMODE_DIGITAL));
IOCON->PIO[0][25] = ((IOCON->PIO[0][25] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT025 (pin 3) is configured as PIO0_25. */
| IOCON_PIO_FUNC(PIO025_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO025_DIGIMODE_DIGITAL));
IOCON->PIO[0][26] = ((IOCON->PIO[0][26] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK | IOCON_PIO_I2CFILTER_MASK)))
/* Selects pin function.
* : PORT026 (pin 4) is configured as PIO0_26. */
| IOCON_PIO_FUNC(PIO026_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO026_DIGIMODE_DIGITAL)
/* Configures I2C features for standard mode, fast mode, and Fast Mode Plus operation.
* : Disabled.
* I2C 50 ns glitch filter disabled. */
| IOCON_PIO_I2CFILTER(PIO026_I2CFILTER_DISABLED));
IOCON->PIO[0][29] = ((IOCON->PIO[0][29] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT029 (pin 11) is configured as ADC0_0. */
| IOCON_PIO_FUNC(PIO029_FUNC_ALT0)
/* Selects function mode (on-chip pull-up/pull-down resistor control).
* : Inactive.
* Inactive (no pull-down/pull-up resistor enabled). */
| IOCON_PIO_MODE(PIO029_MODE_INACTIVE)
/* Select Analog/Digital mode.
* : Analog mode. */
| IOCON_PIO_DIGIMODE(PIO029_DIGIMODE_ANALOG));
IOCON->PIO[0][3] = ((IOCON->PIO[0][3] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT03 (pin 37) is configured as PIO0_3. */
| IOCON_PIO_FUNC(PIO03_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO03_DIGIMODE_DIGITAL));
IOCON->PIO[0][30] = ((IOCON->PIO[0][30] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT030 (pin 12) is configured as ADC0_1. */
| IOCON_PIO_FUNC(PIO030_FUNC_ALT0)
/* Selects function mode (on-chip pull-up/pull-down resistor control).
* : Inactive.
* Inactive (no pull-down/pull-up resistor enabled). */
| IOCON_PIO_MODE(PIO030_MODE_INACTIVE)
/* Select Analog/Digital mode.
* : Analog mode. */
| IOCON_PIO_DIGIMODE(PIO030_DIGIMODE_ANALOG));
IOCON->PIO[0][4] = ((IOCON->PIO[0][4] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT04 (pin 38) is configured as PIO0_4. */
| IOCON_PIO_FUNC(PIO04_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO04_DIGIMODE_DIGITAL));
IOCON->PIO[0][5] = ((IOCON->PIO[0][5] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT05 (pin 39) is configured as FC6_RXD_SDA_MOSI_DATA. */
| IOCON_PIO_FUNC(PIO05_FUNC_ALT1)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO05_DIGIMODE_DIGITAL));
IOCON->PIO[0][6] = ((IOCON->PIO[0][6] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT06 (pin 40) is configured as FC6_TXD_SCL_MISO_WS. */
| IOCON_PIO_FUNC(PIO06_FUNC_ALT1)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO06_DIGIMODE_DIGITAL));
IOCON->PIO[0][7] = ((IOCON->PIO[0][7] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT07 (pin 41) is configured as PIO0_7. */
| IOCON_PIO_FUNC(PIO07_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO07_DIGIMODE_DIGITAL));
IOCON->PIO[0][8] = ((IOCON->PIO[0][8] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT08 (pin 43) is configured as SCT0_OUT1. */
| IOCON_PIO_FUNC(PIO08_FUNC_ALT2)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO08_DIGIMODE_DIGITAL));
IOCON->PIO[0][9] = ((IOCON->PIO[0][9] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT09 (pin 44) is configured as SCT0_OUT2. */
| IOCON_PIO_FUNC(PIO09_FUNC_ALT2)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO09_DIGIMODE_DIGITAL));
IOCON->PIO[1][0] = ((IOCON->PIO[1][0] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT10 (pin 14) is configured as ADC0_3. */
| IOCON_PIO_FUNC(PIO10_FUNC_ALT0)
/* Selects function mode (on-chip pull-up/pull-down resistor control).
* : Inactive.
* Inactive (no pull-down/pull-up resistor enabled). */
| IOCON_PIO_MODE(PIO10_MODE_INACTIVE)
/* Select Analog/Digital mode.
* : Analog mode. */
| IOCON_PIO_DIGIMODE(PIO10_DIGIMODE_ANALOG));
IOCON->PIO[1][1] = ((IOCON->PIO[1][1] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT11 (pin 15) is configured as ADC0_4. */
| IOCON_PIO_FUNC(PIO11_FUNC_ALT0)
/* Selects function mode (on-chip pull-up/pull-down resistor control).
* : Inactive.
* Inactive (no pull-down/pull-up resistor enabled). */
| IOCON_PIO_MODE(PIO11_MODE_INACTIVE)
/* Select Analog/Digital mode.
* : Analog mode. */
| IOCON_PIO_DIGIMODE(PIO11_DIGIMODE_ANALOG));
IOCON->PIO[1][10] = ((IOCON->PIO[1][10] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT110 (pin 30) is configured as PIO1_10. */
| IOCON_PIO_FUNC(PIO110_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO110_DIGIMODE_DIGITAL));
IOCON->PIO[1][11] = ((IOCON->PIO[1][11] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT111 (pin 42) is configured as PIO1_11. */
| IOCON_PIO_FUNC(PIO111_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO111_DIGIMODE_DIGITAL));
IOCON->PIO[1][12] = ((IOCON->PIO[1][12] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT112 (pin 51) is configured as PIO1_12. */
| IOCON_PIO_FUNC(PIO112_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO112_DIGIMODE_DIGITAL));
IOCON->PIO[1][13] = ((IOCON->PIO[1][13] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT113 (pin 54) is configured as PIO1_13. */
| IOCON_PIO_FUNC(PIO113_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO113_DIGIMODE_DIGITAL));
IOCON->PIO[1][14] = ((IOCON->PIO[1][14] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT114 (pin 57) is configured as PIO1_14. */
| IOCON_PIO_FUNC(PIO114_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO114_DIGIMODE_DIGITAL));
IOCON->PIO[1][15] = ((IOCON->PIO[1][15] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT115 (pin 62) is configured as PIO1_15. */
| IOCON_PIO_FUNC(PIO115_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO115_DIGIMODE_DIGITAL));
IOCON->PIO[1][16] = ((IOCON->PIO[1][16] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT116 (pin 7) is configured as PIO1_16. */
| IOCON_PIO_FUNC(PIO116_FUNC_ALT0)
/* Selects function mode (on-chip pull-up/pull-down resistor control).
* : Pull-down.
* Pull-down resistor enabled. */
| IOCON_PIO_MODE(PIO116_MODE_PULL_DOWN)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO116_DIGIMODE_DIGITAL));
IOCON->PIO[1][17] = ((IOCON->PIO[1][17] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT117 (pin 10) is configured as PIO1_17. */
| IOCON_PIO_FUNC(PIO117_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO117_DIGIMODE_DIGITAL));
IOCON->PIO[1][2] = ((IOCON->PIO[1][2] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT12 (pin 16) is configured as ADC0_5. */
| IOCON_PIO_FUNC(PIO12_FUNC_ALT0)
/* Selects function mode (on-chip pull-up/pull-down resistor control).
* : Inactive.
* Inactive (no pull-down/pull-up resistor enabled). */
| IOCON_PIO_MODE(PIO12_MODE_INACTIVE)
/* Select Analog/Digital mode.
* : Analog mode. */
| IOCON_PIO_DIGIMODE(PIO12_DIGIMODE_ANALOG));
IOCON->PIO[1][3] = ((IOCON->PIO[1][3] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT13 (pin 17) is configured as ADC0_6. */
| IOCON_PIO_FUNC(PIO13_FUNC_ALT0)
/* Selects function mode (on-chip pull-up/pull-down resistor control).
* : Inactive.
* Inactive (no pull-down/pull-up resistor enabled). */
| IOCON_PIO_MODE(PIO13_MODE_INACTIVE)
/* Select Analog/Digital mode.
* : Analog mode. */
| IOCON_PIO_DIGIMODE(PIO13_DIGIMODE_ANALOG));
IOCON->PIO[1][4] = ((IOCON->PIO[1][4] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT14 (pin 18) is configured as ADC0_7. */
| IOCON_PIO_FUNC(PIO14_FUNC_ALT0)
/* Selects function mode (on-chip pull-up/pull-down resistor control).
* : Inactive.
* Inactive (no pull-down/pull-up resistor enabled). */
| IOCON_PIO_MODE(PIO14_MODE_INACTIVE)
/* Select Analog/Digital mode.
* : Analog mode. */
| IOCON_PIO_DIGIMODE(PIO14_DIGIMODE_ANALOG));
IOCON->PIO[1][5] = ((IOCON->PIO[1][5] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT15 (pin 19) is configured as ADC0_8. */
| IOCON_PIO_FUNC(PIO15_FUNC_ALT0)
/* Selects function mode (on-chip pull-up/pull-down resistor control).
* : Inactive.
* Inactive (no pull-down/pull-up resistor enabled). */
| IOCON_PIO_MODE(PIO15_MODE_INACTIVE)
/* Select Analog/Digital mode.
* : Analog mode. */
| IOCON_PIO_DIGIMODE(PIO15_DIGIMODE_ANALOG));
IOCON->PIO[1][6] = ((IOCON->PIO[1][6] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT16 (pin 26) is configured as USB0_VBUS. */
| IOCON_PIO_FUNC(PIO16_FUNC_ALT7)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO16_DIGIMODE_DIGITAL));
IOCON->PIO[1][7] = ((IOCON->PIO[1][7] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT17 (pin 27) is configured as ADC0_10. */
| IOCON_PIO_FUNC(PIO17_FUNC_ALT0)
/* Selects function mode (on-chip pull-up/pull-down resistor control).
* : Inactive.
* Inactive (no pull-down/pull-up resistor enabled). */
| IOCON_PIO_MODE(PIO17_MODE_INACTIVE)
/* Select Analog/Digital mode.
* : Analog mode. */
| IOCON_PIO_DIGIMODE(PIO17_DIGIMODE_ANALOG));
IOCON->PIO[1][8] = ((IOCON->PIO[1][8] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT18 (pin 28) is configured as PIO1_8. */
| IOCON_PIO_FUNC(PIO18_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO18_DIGIMODE_DIGITAL));
IOCON->PIO[1][9] = ((IOCON->PIO[1][9] &
/* Mask bits to zero which are setting */
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
/* Selects pin function.
* : PORT19 (pin 29) is configured as PIO1_9. */
| IOCON_PIO_FUNC(PIO19_FUNC_ALT0)
/* Select Analog/Digital mode.
* : Digital mode. */
| IOCON_PIO_DIGIMODE(PIO19_DIGIMODE_DIGITAL));
}
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/
Reference in New Issue Copy Permalink